Handsome Up Penis Pump sleeve as constrictor

[Ian]

Use these internally to replace the constrictor, they are cheap and work amazingly well, you can’t go wrong, highly recommended! 🙂

http://www.ebay.com/itm/3-Interchangeable-Vacuum-Seal-Sleeve-For-Handsome-Up-Penis-Pump-Erection-Aid-/380411276094

[oldguy79]

Yes! I tried these and am greatly impressed. The right size puts the ‘jerk’ in a Venus jerk-off. I ordered another 2 sets. I just wish I could order just my favorite size, instead of the whole set of 3.

[Ian]

A couple of pics, with and without liner

[URL=http://img.3ezy.net/a1/a_9d1dabf0066e4_800.jpg][IMG]http://a1.3ezy.net/a_9d1dabf0066e4_200.jpg[/IMG][/URL]
[URL=http://img.3ezy.net/a1/a_fc4a0b8ee2e7c_800.jpg][IMG]http://a1.3ezy.net/a_fc4a0b8ee2e7c_200.jpg[/IMG][/URL]

[Ian]

Well that didn’t work, lets try this! . . .

http://img.3ezy.net/a1/a_fc4a0b8ee2e7c_800.jpg

http://img.3ezy.net/a1/a_9d1dabf0066e4_800.jpg

[oldguy79]

Let’s see if I can add a picture to this series.
https://groups.yahoo.com/neo/groups/venus2000formen2/photos/albums/1676357580

I find the small bungee cord useful for experiments. The ‘Shorty’ receiver uses less air, thus has a brisker action if you like to finish off fast. Or should I say, if you need maximum encouragement, the Shorty spanks harder. The receiver restraint is self-explanatory.

[Walt]

Can these work with the 2.50 receiver?

[Ian]

oldguy79 – I see you use the Handsome sleeves on the outside, I did try that but I found using them on the inside as a normal constrictor more comfortable.

Walt – I am not sure, I don’t have a 2.50 receiver, they are a perfect fit for the 2.0 receiver but they may well stretch enough to fit a 2.50 also.

[Ian]

oldguy79 – interested in making a “shorty finisher”, assume this is a cut down receiver?, how long is it, can you fit all the way inside it or only part of the way?

[oldguy79]

The Shorty is 4″. I cut it down per Wayne’s instruction shortly after I got the Venus – 4 or 5 years ago. I can’t remember why now. I think I rolled the receiver to get a felt pen line squarely on it and used a hack saw, very carefully. I get most of me into it, I’m kinda small. Haven’t noticed any bumping against the end. Because of the reduced air space it has a noticeably livelier action. I don’t use it every time.

I would try cutting a receiver down to 5″ first off. Remember to sand the edges carefully.

I tried Wayne’s idea of O rings in the constrictors. That would be similar to using the Handsome gizmos as constrictors as you suggest, I’ve always used the Handsome’s on the outside at the mouth. I’ll have to give your idea a try. O rings don’t have a lot of ‘give’ to them, these might work better. They certainly do the job mounted on the outside!

[montoya143]

Thanks Ian and Oldguy. I just ordered a couple sets of these and am amazed at how much it enhances the Venus experience. Have only used on outside so far but will build another receiver soon with one of these replacing the normal constrictor. This thing really ramps up everything. I never have pop off problems either and the standard constrictor made from a piece of liner material worked just fine for me, but this thing takes it to a whole new level. The evenhanded tighter grip this delivers makes it possible to stroke anywhere on your shaft…low, high, over frenulum, wherever, and with no pop off. Can’t get enough. I’m a kid with a new toy again. I can see all kinds of other possibilities with this, like maybe using it on a head massager or in conjunction with the new stroke sleeve.

[montoya143]

This is another even more robust constrictor available from Handsome. It fits very well on a 2″ cylinder and provides a very snug fit and seal. Strokes well and hugs your shaft well. I use it on outside of the receiver/liner, with the cone shaped tail inserted into the receiver. Comes in black as well.

http://www.ebay.com/itm/Pure-Silicone-Universal-Penis-Pump-Replacement-Sleeve-Donut-Better-Seal-Suction-/141337469031?pt=LH_DefaultDomain_0&hash=item20e85ea067

[Ian]

Thanks Montoya . . . a good find, I ordered the Handsome constrictor and it arrived yesterday. It looks very good and seems to be a perfect fit for a 2″ receiver, I will be giving it a good testing very soon and will post the results here 🙂

[Ian]

Michael . . . I’m in the UK and found some on eBay and there was some on Amazon but I am not seeing them now. You are right you don’t know what is the best size until you try it so you do need the set in the first instance. I will keep a look out and let you know if I see any around, it is a cheap and very effective mod and well worth doing.

[Author]

Posts