Reply To: stroke lenght

[VENUSJUDGE666]

THERE IS AN INTERNAL ADJUSTMENT FOR SO CALLED STROKE LENGTH . YOU HAVE TO TAKE THE 4 ALLEN SCREWS OUT WHICH THEY GIVE YOU A WRENCH FOR . ON THE WHEEL WHERE THE DIAPHRAM ROD CONNECTS THERE ARE 5 HOLES , THE CLOSER TO THE MOTOR SHAFT THE LESS THE DIAPHRAM MOVES AND THE FURTHER OUT THE MORE IT MORES . THE MIDDLE SETTING WORKS VERY GOOD AND NOT HARD ON DIAPHRAM AS THE LARGEST SETTING WHICH MOVES IT ALOT . YOU ALSO NEED TO MAKE SURE NO AIR IS LEAKING OR ENTERING AS THIS WILL MAKE RECEIVER KEEP MOVING UP . ONE GUY HAD AIR GETTING IN RECEIVER CAUSE NIPPLE THAT HOSE HOOKS TO WAS LOOSE AND LEAKING AND I HAD THAT HAPPEN TOO AND HAD TO TIGHTEN THE NUT ON IT . HOPE THIS HELPS .