New user, keeps riding up, have to keep taking air out - Venus for Men by Sybian

This topic contains 1 reply, has 2 voices, and was last updated by  montoya143 5 months ago.

  • Author
    Posts
  • #75696

    fett
    Participant

    I just got my venus and am having a little trouble with it. I can get it situated with a reasonable stroke length, but then it will start riding up and the only way to get it to stop it take air out. I have to keep taking air out throughout the session (very often) to get it to not completely ride up and off of me.

    Is there anything I can do to solve this? Do maybe I have something sized wrong with my receiver? it is pretty tight on me.

    #75731

    montoya143
    Participant

    If liner is too tight it could cause receiver to ride up. Or if too much air builds up inside the liner it will cause it to ride up and eventually pop off if air is not bled off by pushing the button. The one way valve in the end cap is designed to bleed off excess air and not permit air to come in through the valve (one way valve). If this valve gets clogged, it cannot do its job and air builds up with no way out, resulting in ride up and pop off. Make sure valve is functioning, that the ball bearing inside is freely moving (you should hear it rattle when you shake the end cap). Rinse it underwater thoroughly after each session and make sure valve is clear. The other possibility is that the receiver is not sealing properly causing air leakage which exceeds the valves ability expel it. If the valve is constantly letting air out during your session, you may need to tune up the liner to get a better seal, or even get a notch smaller liner.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.