[gafferlv]

I have noticed if I do not stretch the liner as tight, keeping it a little looser, I get better suction. I also have my stroke length at the second to last hole. I have to let more air out of the system or else it pops off, as it is too long for my size. After I let as much air out as I can, the stroke length shortens up and it sucks hard. Too hard sometime that it causes discomfort.

[gafferlv]

I also use a Hitachi. Had difficulty with climax until I added it. I use cotton cord with 2 clove hitch knots, making a kind of strap that holds it tight to the reliever. will try the thick f=rubber bands though.

[gafferlv]

What I do if the valve gets sticky during a session is just put a drop of lube on the valve from the top as it is stroking. It sucks in the lube and loosens the ball as well as creating a better seal. Works every time for me. I do not worry about interrupted session at all.

[gafferlv]

I found a way to create a little texture to the latex product that is supplied. I took the sleeve and turned it inside out. Then with coarse sand paper, I sanded the liner on both sides in all different directions. Washed off the grit and turned it back the correct way. Defiantly can feel the difference. Do not sand it to the point of a tear or making too thin. I have some other ideas, will let you know how they work.

[Author]

Posts